Anchoring Columns to CMU Wythes Raleigh NC
Brick, Stone, Concrete, Repairs, Retaining Wall, Step, Patio, Walk, Fireplace, Column, Point up, Masonry Cleaning, Sealing, Chimney, Lattice, Fence, Stairs, Foundation, Veneer, Repair
Day time hours Monday - Friday
Anchoring Columns to CMU Wythes
Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007
By Walter A. Laska
When masonry walls are constructed independent of the steel structure, anchorage of the masonry to the steel column is not required if the walls span vertically and are supported laterally by floors and roofs acting as diaphragms or structural members. However, if walls span horizontally, the concrete masonry must be anchored to the column to brace the wall laterally.
Distribution of the wind load acting on the wall is resisted by both wythes in proportion to their relative thickness. Joint reinforcement ties the brick wythe to the concrete masonry, which creates a positive bond. Wind loads are transferred from the brick wythe to the concrete masonry wythe and through the anchors to the steel column. This connection laterally braces the masonry wall to the steel column.
Use an adjustable anchor connection if a non-rigid connection between the masonry and the column is required. One type of adjustable anchor engages deformed rods welded to the column flanges at locations where the masonry wall completely bypasses the steel column and the column web is parallel to the wall. Deformed anchors can be supplied in continuous sections if spacing requirements are tight. This type of connection permits in-plane movement of the wall and laterally braces the masonry to the steel column.
Consider pull out strengths and resistance to buckling under load when selecting anchor types. Providi...
Click here to read full article from Masonry Construction