Brick Test Asheville NC

I have received test data from the manufacturer of the brick I selected for a new building. How do I read the test data? What is important and what isn't important? There are several items that I would examine on the brick test data in Asheville.

D & D's Flooring & Interiors
(704) 684-4887
628 West Morehead Street
Charlotte, NC
Services
Formerly The Plywood Mart, Inc.; Mohawk® carpet, hardwood, laminate, resilient and tile flooring; Shaw® carpet, hardwood, laminate, resilient and tile flooring; Armstrong® hardwood, laminate and resilient flooring; Bruce® hardwood flooring; custom site finished hardwood floors (custom colors and designs available); Daltile® tile and stone; Crossville® tile and stone; Florida® tile and stone; Marazzi USA® tile and stone; Andersen® windows and doors; Marvin® windows and doors; Santa Cruz®
Membership Organizations
Homeowner Approved, National Wood Flooring Association Member.

Data Provided by:
Stonebridge Yards
(919) 267-5121
109 Parkcanyon Ln
Cary, NC
 
Vandergriff Masonry
(919) 906-0741
11457 Claybank Place
Raleigh, NC
Services
Brick, Stone, Concrete, Repairs, Retaining Wall, Step, Patio, Walk, Fireplace, Column, Point up, Masonry Cleaning, Sealing, Chimney, Lattice, Fence, Stairs, Foundation, Veneer, Repair
Hours
Day time hours Monday - Friday

Louis Concrete & Steel Inc
(336) 841-5246
1601 Woodside Ave
High Point, NC
 
American Chimney Sweep Co A
(919) 467-5088
303 Trappers Run Dr
Cary, NC
 
Preferred Carpet One
(704) 271-1397
5001 South Boulevard, Suite E
Charlotte, NC
Services
Product only, or product plus installation. Hardwood floors: All species and types, solid and engineered, unfinished and prefinished laminate floors, cork floors and bamboo floors; hardwood sanding and refinishing. Other flooring: Marmoleum, sheet vinyl, luxury vinyl V.C.T., rubber floors, cove base. Carpet: All carpet types for residential and commercial; custom area rugs, stair runners and outdoor carpets. Stone: Travertine, slate and exotic stone, granite floors, ceramic, porcelain, glass til
Membership Organizations
Homeowner Approved, Allen Tate Concierge Services.

Data Provided by:
Williams Masonry & Concrete, Inc.
(910) 470-6777
1404 Corbett St.
Wilmington, NC
 
P & D Masonry
(910) 237-3559
596 Henry Hammonds Rd
Lumberton, NC
Services
Brickwork, Blockwork, Stonework

Residential Construction Services Inc
(919) 467-4335
118 E State Ave
Cary, NC
 
Hester'S Masonry
(919) 956-7936
2416 Lindmont Ave
Durham, NC
 
Data Provided by:

Brick Test

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: April 1, 1994

I have received test data from the manufacturer of the brick I selected for a new building. How do I read the test data? What is important and what isn't important? There are several items that I would examine on the brick test data. In freeze/thaw environments the units should be Grade SW. A Grade SW brick must have an average maximum cold water absorption of 17% with a maximum individual value of 20%. The maximum average saturation coefficient is 0.78 with the maximum individual value of 0.80. Saturation coefficient is sometimes referred to as C/B because it represents the ratio of the cold water absorption divided by the absorption after 5 hours of boiling. In areas not normally subjected to freeze/thaw deterioration, Grade MW bricks can be used. The above values are increased for MW brick to an average maximum absorption of 22% and maximum individual value of 25% and an average maximum saturation coefficient of 0.88 and a maximum individual value of 0.90. The saturation coefficient can be waived if the average cold water absorption is less than 8% with at most one unit between 8% to 10%. The requirements for both water absorption and saturation coefficient can be waived if the units pass the freezing and thawing test described in ASTM C 67.Minimum compressive strength values also are set for durability.

Click here to read full article from Masonry Construction