Building Products Greensboro NC

The K11HGA-17P-3000W features Jenny's "K" pump, a heavy-duty, single-stage cast-iron compressor pump. The unit is powered by an 11-horsepower Honda GX series OHV engine with electric start and produces 8.9 CFM at 100 PSI or 8.6 CFM at 125 PSI for quick recovery.

The Home Depot
(336)691-0613
2912 S Elm Eugene St
Greensboro, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(336)545-1125
3215 Brassfield Rd
Greensboro, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Greensboro, NC
(336) 235-0900
504 Four Seasons
Greensboro, NC

Data Provided by:
Global Veneer Sales, Inc.
(336) 885-5061
PO Box 5829
High Point, NC

Data Provided by:
MARCO SUPPLY/Greensboro
(336) 275-4978
1027 W Lee St Greensboro, NC, 27403
Greensboro, NC
 
The Home Depot
(336) 545-1125
3215 Brassfield RD
Greensboro, NC
 
The Home Depot
(336)218-0655
4425 W Wendover Ave
Greensboro, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Hardwood Store of North Carolina, Inc.
(888) 445-7335
Intersection of Minneola St. and Whitsett Ave.
Gibsonville, NC

Data Provided by:
The Home Depot
(336)883-0500
2300 N Main St
High Point, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

LOWE'S OF NORTH GREENSBORO, NC
336 545-2040
3001 BATTLEGROUND AVE. GREENSBORO, NC, 27408
Greensboro, NC
 
Data Provided by:

Building Products

Provided by:

Lumber Link
Socket Systems 
— Socket Systems manufactures a steel coupling system called Lumber Link. This 1/4-inch plate steel joins 6x6 timbers to create a clear span building up to 30 feet wide and 60 feet wide using 6x8 timbers.
Frames are assembled on the ground with a choice of gable or gambrel roof and raised into place using the foot locking system. No cranes or lifting equipment is needed.
A second floor can be installed using metal I-Beams or wood members.
Vertical supports are not set into cement to eventually rot, but are safe inside the foot fixture. Lumber Link uses no treated lumber and less wood than typical trusses.

The Wallbrator
LiteForm Technologies —  LiteForm Technologies has introduced a new ICF wall vibrator to its ICF accessory line. Made in the U.S. and named “Wallbrator,” this durable ICF wall vibrator attaches to any ½-inch electric or cordless drill. Combining a high speed, low impact vibration, the wallbrator insures good consolidation of concrete with one pass. Sizing in at just under 3 lbs. and a length of 7 inches, this tool is lighter  and more compact than other traditional external vibrators. The grip design offers installers a comfortable non-slip feel when operating under any weather condition.

Compressor/generator
Jenny Products, Inc
— Two new compressor/generator combination models provide portable air and power source in one machine. The K11HGA-17P-3000W features Jenny’s “K” pump, a heavy-duty, single-stage cast-iron compressor pump. The unit is powered by an 11-horsepower Honda GX series OHV engine with electric start and produces 8.9 CFM at 100 PSI or 8.6 CFM at 125 PSI for quick recovery. Featuring a “G” pump and a 13-horsepower, electric start Honda GX engine, the G13HGA-17P-3000W delivers 16.2 CFM at 100 PSI or 15.6 CFM at 125 PSI.

From Frame Building News