Designing Reinforced Masonry Lintels Jacksonville NC

Since people first began putting windows in their shelters, they have needed a way to support the weight of the wall above the window. The solution was the lintel, a beam that spans from one side of the window to the other. Masonry lintels must be reinforced.

Impact Drywall & Paint Inc
(919) 422-0918
7833 Harps Millwoods Run
Raleigh, NC
 
A B Drywall
(704) 896-6868
8936 Steinbeck Ct
Charlotte, NC
 
Area Drywall
(704) 423-5700
4119 Rose Lake Dr
Charlotte, NC
 
Faircloth Drywall
(919) 730-8882
7606 HWY 751
DURHAM, NC
Services
drywall sheetrock repairs

Carolina Builders Corp
(704) 536-4491
5428 N Sharon Amity Rd
Charlotte, NC
 
Bonitz Inc.
(704) 262-6400
4539 Enterprise Drive NW
Charlotte, NC
 
Dellinger F W Inc
(919) 851-1867
20 Oakdale Dr
Raleigh, NC
 
Authentic Drywall & Remodeling, Inc
(704) 536-3444
6030 The Plaza
Charlotte, NC
 
Precision Walls, Inc
(704) 597-7577
2205 Distribution Center Drive
Charlotte, NC
 
E. L. Thompson Associates, LLC
(404) 872-4726
2255 Cumberland Parkway
Charlotte, NC
 

Designing Reinforced Masonry Lintels

Provided By:

Source: Masonry Construction
Publication date: March 1, 1991

By David C. Gastgeb

Since people first began putting windows in their shelters, they have needed a way to support the weight of the wall above the window. The solution was the lintel, a beam that spans from one side of the window to the other.

Masonry lintels must be reinforced. They can be constructed of standard clay masonry units (solid or hollow), glazed brick and tile, specially formed concrete masonry lintel units, bond beam concrete masonry units, or standard concrete masonry units with grooved, depressed, or cutout webs. These units are laid in a masonry wall in a way that creates a channel in which steel reinforcing and grout are placed.

DETERMINING THE LOADS

To design a masonry lintel, you must first determine the load to be supported. The Brick Institute of America (BIA), National Concrete Masonry Association (NCMA), and authors Schneider and Dickey in their book, Reinforced Masonry Design, all use a graphic load diagram to do this.

In this method, the lintel is designed to support a triangular section of masonry above it. Outside this triangle, arching action of the masonry is assumed to support the weight of the wall and any uniform loads, such as roof trusses or floor joists.

The full text of this article is available as a PDF document. To download the PDF version of the article, click here.

Click here to read full article from Masonry Construction